Grid View:
Pre-Order

3mm replacement chuck for 3 kW Ibag milling spindle

561.00₺
(0)

3mm replacement chuck for 3 kW Ibag milling spindle CodeG42455675DescriptionThis chuck is used to clamp 3mm bits to the bit into the spindle. It has to be changed regularly, particular if there is a lot of bit changes in your daily work (typical..

Pre-Order

8mm replacement chuck for 3 kW Ibag milling spindle

561.00₺
(0)

8mm replacement chuck for 3 kW Ibag milling spindleCodeG42454736DescriptionThis chuck is used to clamp 8mm bits to the bit into the spindle. It has to be changed regularly, particular if there is a lot of bit changes in your daily work (typically onc..

Pre-Order

BIT-ADS03-1003-38

43.00₺
(0)

BIT-ADS03-1003-38CodeG42449447Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMethodAcrylic panels, PMMA (Plexiglas®, Pers..

Pre-Order

BIT-ADS03-1006-38

43.00₺
(0)

BIT-ADS03-1006-38CodeG42449462Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMethodAcrylic panels, PMMA (Plexiglas®, Pers..

Pre-Order

BIT-ADS03-1504-38

43.00₺
(0)

BIT-ADS03-1504-38CodeG42449454Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMethodAcrylic panels, PMMA (Plexiglas®, Pers..

Pre-Order

BIT-ADS06-2006-50

51.00₺
(0)

BIT-ADS06-2006-50CodeG42449488Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMethodAcrylic panels, PMMA (Plexiglas®, Pers..

Pre-Order

BIT-AUS03-1004-30

43.00₺
(0)

BIT-AUS03-1004-30CodeG42443614DescriptionSingle flute. 4mm flute length.Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMe..

Pre-Order

BIT-AUS03-1506-30

43.00₺
(0)

BIT-AUS03-1506-30CodeG42443622DescriptionSingle flute. 6mm flute length.Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMe..

Pre-Order

BIT-AUS03-2006-30

43.00₺
(0)

BIT-AUS03-2006-30CodeG42443630DescriptionSingle flute. 6mm flute length.Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMe..

Pre-Order

BIT-AUS03-2011-38

42.00₺
(0)

BIT-AUS03-2011-38CodeG42443655DescriptionSingle flute. 11mm flute length.Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessM..

Pre-Order

BIT-AUS06-3006-50

51.00₺
(0)

BIT-AUS06-3006-50CodeG42445916DescriptionAcrylic, single flute Up-Cut bit. 3mm tip, 6mm flute length.Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMa..

Pre-Order

BIT-AUS06-3011-50

51.00₺
(0)

BIT-AUS06-3011-50CodeG42437889DescriptionOur top selling super sharp up-cut bit is grinded and polished for an optimized routing surface and gives superior results on acrylic. The cutting edges has a very high degree of sharpness and polish for, plas..

Pre-Order

BIT-AUS06-6022-58

70.00₺
(0)

BIT-AUS06-6022-58CodeG42442707Recommended useA. bits have cutting edges with a very high degree of sharpness and polish, for Acrylic, plastics, wood etc.ApplicationsCutting InfoMaterialSub CategoryThicknessMethodAcrylic panels, PMMA (Plexiglas®, Pers..

Pre-Order

BIT-BRAILLE06-1503-50

80.00₺
(0)

BIT-BRAILLE06-1503-50CodeG42455477DescriptionBit for use with the braille tool. Used for harder materials like aluminum, etc. Max RPM is 20000.ApplicationsSpecificationsDShank diameter6mmdTip diameter1.56mmMMax milling cutting thickness3mmRequirement..

Pre-Order

BIT-EBV06-120-2F

170.00₺
(0)

BIT-EBV06-120-2FCodeG42458141DescriptionHi-speed two flute folding tool for aluminum composite material. This tool makes a 120 degree groove with a 1,8mm radius surface in the bottom for better folding. Max recommended RPM is 60’.Recommended useHi-sp..

Pre-Order

BIT-EBV06-120-4F

51.00₺
(0)

BIT-EBV06-120-4FCodeG42459735DescriptionHi-speed four flute folding tool for grey board and similar materials. This tool makes a 120 degree groove. Max recommended RPM is 60’. Shaft 6mm.Recommended useHi-speed four flute folding tool for grey board a..

Showing 1 to 16 of 62 (4 Pages)
bookmark